Wind Compressor Energy System

 

 

Oil Well Pumps

 

 

Down Hole Oil Well Pumps:

These pumps are manufactured from high grade stainless steel to prevent corrosion. The valve seals are made of a proprietary oil/chemical resistant material which is designed and engineered specifically for oil wells. The pumps have no moving parts above ground and are MAINTENANCE FREE. An electrical connection is not required to operate the pumps. They work 100% off compressed air or CNG.

Three poly pipes are attached to the pump. 1" poly pipe is for oil/fluid out and two 3/4" poly pipes are for air inlet and air exhaust. A cable is attached to the top of the pump for lowering and retrieving.
 

pump specificationsClick here to calculate gallons per of pipeStandard Pump ConfigurationDeep Well Pump Configuration

 

 

  • High Output Pump
    The higher output pump.
    Top Pump call for pricing; Bottom Pump call for pricing

    Specifications: 4” x 54”, 1” check valve
    • 16.5 GPM     65 PSI    7.0 CFM
    • 17.5 GPM     75 PSI    8.5 CFM
    • 18.5 GPM     85 PSI    9.0 CFM
    • 20.0 GPM   105 PSI   10.0 CFM
       
  • Transfer Pump
    6” x 24” pump.
    Priced at call for pricing

    Specifications: 6” x 24”, 1” check valve
    • 15.75 GPM   50 PSI   3.5 CFM
    • 16.50 GPM   60 PSI   4.0 CFM
    • 17.50 GPM   70 PSI   4.5 CFM
    • 18.75 GPM   80 PSI   5.0 CFM
  • Standard Pump
    The standard all-around pump.
    Top Pump call for pricing; Bottom Pump call for pricing

    Specifications: 3” x 54”, 1” check valve
    • 14.0 GPM     65 PSI   7 CFM
    • 14.5 GPM     75 PSI   7 CFM
    • 15.0 GPM     85 PSI   8 CFM
    • 16.0 GPM   105 PSI   9 CFM
  • Extension Screen
    100% stainless steel.
    Priced at call for pricing

    Specifications: 2” x 36”

 

 

Replace this . . .

Replace this . . .

. . . With this

. . . With this

We ship worldwide - Call For Information

 

Made in America
Proudly Made in America

 

 

Copyright Wind Compressor, LLC   |   Sitemap   |   Website by Classic Insight